UltraDeck Natural & Synthetic Turf Protection System

Rigid Grass Protection For Use As A Temporary Access Path, Temporary Decking, Special Event Floor & Concert Floor


Medium-duty portable flooring suitable for large-scale tents and special events. Ideal where a more rigid and level floor is required.

UltraDeck* is Signature's mid-range tent flooring system, ideal for nearly any tent flooring application. This system is meant as a true substitute for lay down and built up plywood floors. It provides a rigid and uniform feel underfoot that is suitable for upscale, high-end events.

Unlike other modular plastic floors, UltraDeck can be laid straight down on most ground surfaces, leveled with plywood stringers and shims, or raised on multiple layers of stringers as required.

The UltraDeck system is suitable for more rugged environments, where greater heights and more rigidity are required. UltraDeck sections can handle a wide range of uneven ground surfaces since modules are a beefy 2' x 1' x 1-1/8" (LWH). Ribbed reinforcements provide tremendous strength and weight loading capabilities and larger cable channels allow heavy gauge power cables to be run underneath the floor.

UltraDeck is available in 2 different models. UltraDeck 1 (EDU1) has top drainage holes, allowing water and ventilation to penetrate - making it ideal for natural turf fields. UltraDeck 2 (EDU2) has a smooth top (without drainage holes) - making it ideal for synthetic turf fields, indoor areas and concrete or asphalt surfaces.

Modules snap together easily and quickly on all sides using our uniquely engineered intermodule connection system to form a rigid and seamless protective floor. Modules can be connected in both directions and at any module connection point, including at a 90 degree angle - allowing for maximum flexibility in floor design.

UltraDeck is ideal for pole tents, frame tents, and clear span structures. It provides an attractive and event-friendly look, which often doesn't need to be covered with carpet.

When placed on level ground or on plywood stringers, UltraDeck can support the weight of scissor lifts, forklifts with pneumatic tires, and light trucks. This makes UltraDeck ideal for larger tents, where equipment is required for the hanging of lighting, placement of decorations, and transport of equipment.

By raising UltraDeck on 2" x 6" or 2" x 8" plywood boards (stringers), it is possible to create a perfectly level, raised floor.

With the ability to be raised off of the ground, UltraDeck is a true substitute to costly wood. Unlike wood, it will not warp, get waterlogged, or rot. Additionally, with UltraDeck there is no need to use dangerous screws or nails as modules self connect and do not need to be screwed down to the plywood stringers.



* Signature Systems Group, LLC's UltraDeck products are not in any way affiliated, endorsed, or sponsored by Menard, Inc. or any of Menard, Inc.'s affiliates or subsidiaries.

Module Size:12” W x 24” L x 1.125” H (30.48cm x 60.96cm x 2.85cm). Ships in pre-assembled 3’x4’ panels. Transitional edging is available.

Material: High-impact polypropylene

Weight: 2.88 lbs (1.31 kg) per tile - 1.44 lbs sq/ft (7.03 kg sq/meter)

Weight Load: 20,000 lbs sq/ft (97,648 kilos sq/meter) static load, solid sub-surface